The second ramp position allows the ramp to stand up straight when a mobility device is on the carrier. The ramp is held vertically in place with a spring pull pin. The last position is the ramp unfolded.
This position allows for scooters or power wheelchairs to be pushed or driven up the ramp. A welded handle featured on the ramp allows for easy folding and unfolding.
Tie-down straps can be hooked onto any of the 10 tie-down holes featured on the 4 1/4 tall ramp sides. Supporting the carrier is a heavy-duty 2 hitch tube. It features four bolts and a safety pin underneath to allow the hitch tube to be removed from the carrier.
The hitch tube has a 5/8 hitch pin hole for securing the carrier to your vehicle and will work on class III or IV hitches. This carrier is not recommended for 1 1/4 hitches. Please Note: Mobility devices are not to be occupied when loading, unloading, or on the carrier! Never exceed the rated capacities of your hitch.48.25" long x 28" wide usable surface. 27.5" wide x 43" extended self-storing loading ramp handles even the most difficult chairs/scooters. It can be assembled with just a few bolts in less than 15 minutes.
Leveler bolt and anti-tilt collar included. Heavy-duty, extra-thick steel mesh surface.
Usable Dimensions: 48.25 x 28. Maximum chair width: 27 inches. If you need more information, do not hesitate to send us a message! The item "ALEKO Wheelchair Power Scooter Folding Cargo Carrier Rack Foldable Ramp 400LB" is in sale since Friday, June 11, 2021. This item is in the category "Health & Beauty\Medical & Mobility\Mobility Furniture & Fixtures\Access Ramps".The seller is "hustlestoreus" and is located in Kent, Washington. This item can be shipped to United States.